Replacement Parts; Faq; Troubleshooting - Panasonic ES-LV6Q Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

►Replacement parts

Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑LV6Q

FAQ

Question
Will the battery deteriorate
if not used for an
extended period of time?
Can I charge the shaver
after every use?
Why should the adaptor be
disconnected after charge?
What is the constituent of
the dedicated oil?
Why does the appliance
beep twice after switched
off?
ES-LV6Q_US.indb
15
System outer foil
WES9177
Inner blades
WES9170
Answer
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
The battery used is a lithium‑ion,
so charging after every use will
have no effect on battery life.
Charging the battery for more than 1
hour will not affect battery
performance, but disconnect the
adaptor for safety and to save energy.
Constituent of the oil is liquid paraffin.
The sound indicates that the
battery capacity is running low.
Please charge the appliance.

Troubleshooting

Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorized by
Panasonic for repair.
Problem
The appliance may not unlock
depending on usage conditions.
Place the appliance on the desk,
The power switch does
then pick it up again. If it still does not
not turn ON.
operate, press and hold the power
switch for more than 2 seconds to
forcibly unlock the appliance.
Depending on the beard
thickness or the amount of beard
trimmings in the shaver head, the
shaving sensor may not react and
the driving sound may not
change. This is not abnormal.
The shaving sensor may not
respond depending on the type
and quantity of the shaving gel.
The shaving sensor does
This is not abnormal.
not respond.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. (See page 13.)
The shaving sensor may not
respond when there is not enough
oil on the blades.
Action
15
2018/03/02
15:53:10

Publicité

Table des Matières
loading

Table des Matières