Cleaning And Storage; Troubleshooting - MAXXMEE BM8301 Mode D'emploi

EN

CLEANING AND STORAGE

Please note!
■
CAUTION – Danger of burns from
hot device parts! Allow the device
and all accessories to cool down
before any cleaning.
■
Do not pour any water into the motor
unit! The heating elements must not
come into contact with water or other
liquids.
■
Do not pour any cleaning agents
directly onto or into the motor unit.
■
The accessories are not dishwash-
er-safe!
■
Do not use any caustic or abrasive
cleaning agents for cleaning. These
can damage the surface.
• Remove the baking tin and the
dough hook from the device (see
the "How Do I Operate the Bread
Maker?" chapter, "Programme End"
section).
L
If the dough hook cannot be
removed from the baking tin,
pour warm water into the baking
tin and allow it to soak for a few
minutes.
• Clean the motor unit with a damp
cloth.
• Clean all accessories with warm water
and mild detergent.
• Make sure that all parts are dry
before the device is reassembled and
stored away.
• Store the device and all accessory
parts in a dry, clean place that is not
accessible to children and animals.
34
01383_Inlay_DE-EN-FR-NL_A5_V1_1.indb 34 01383_Inlay_DE-EN-FR-NL_A5_V1_1.indb 34

TROUBLESHOOTING

If the device does not work properly,
check whether you are able to rectify the
problem yourself. If the problem cannot
be solved with the steps below, contact
the customer service department.
Do not attempt to repair an elec­
trical device yourself!
The device does not work.
Is the mains plug is not inserted in the
plug socket correctly.
►
Push the mains plug into the plug
socket as far as it will go.
The plug socket is defective.
►
Try another plug socket.
There is no mains voltage.
►
Check the fuse of the electrical dis-
tributor (fuse box).
The baking tin has not been inserted
correctly.
►
Correct the fit.
The lid is not closed correctly.
►
Close the lid.
The device has overheated.
►
Switch off the device and pull the
mains plug out of the plug socket.
Remove the baking tin containing
the ingredients from the device
and then allow the device to cool
down COMPLETELY before it is used
again.
The error message H:HH appears on
the display.
The device is still too hot.
►
Remove the baking tin containing
the foodstuffs from the device, pull
the mains plug out of the plug sock-
et and allow the device to continue
to cool.
30.04.2020 14:40:08 30.04.2020 14:40:08