Electrical Connections; General Information - Toshiba QuietCo2OL Notice D'instructions

ELECTRICAL CONNECTIONS

Caution
Electrical compartment contains live terminals, please ensure supply is isolated before
removing the cover. Any person accessing this part of the unit should be suitably trained and
competent.
Before carrying out any maintenance work, disconnect the drive and the external control
circuits from the power supply by moving the main system switch to "off". Once power has
been disconnected from the drive,
electrical cables
Q C
30M T
230 V / Single phase
Power sup ply
Max.
absor bed
13,3 A
current
without
Max. absorbed
cu rrent wit hout
12,5 A
evaporato rs
(Water cooled)
If consumers are powered from the condensing unit using the available circuit breakers, select
the main power supply by adding the actual consumer input current to the above values

General information

– The machine is designed in accordance with EN60204-1.
– Supplying cable must be connected on terminal of main switch.
– All cabling on site must conform to the legal standards in force in
the relevant countries and to EN60204-1.
wait at least 5 minutes before disconnecting the
.
QUIETCO2OL MT
Q C QC
45M T 67MT
400 V / 3ph /50 Hz
/ 50 Hz
+ G
18,7 A 27,2 A
19,9 A 26,4 A
QC
100MT
230 V / Single
N + G
18,5 A
16,5 A
23
QUIETCO2OL LT series
QC QC
75LT 112LT
400 V / 3 ph /
phase / 50 Hz N + G
50 Hz
18,4 A 17,5 A
17,6 A
17,5 A
QC
167LT
31,4 A
31,4 A