How To Prepare The Machine For Operation - Clarke BEXTSPOT Manuel De L'utilisateur

How To Prepare the Machine For Operation

Before using this machine check the following:
1. Check all fittings and connectors for proper
assembly.
2. Check all hoses for leaks. Repair or replace any
damaged hoses.
3. Check power cord for any damage. If damaged,
replace.
Filling the machine:
1. Fill the solution tank with clean hot or cold water.
WARNING: Do not use water that is hotter
than 140°
2. Use only brand name cleaner and mix the
cleaner per package instructions
Switches
®
Clarke B S TM
EXT POT Operator's Manual (EN)
Latch
Figure2
ENGLISH
Water Pump
Turn the pump switch ON. This pump is a by pass
pump and operates continuously.
Vacuum (see figure 2)
1. Be sure access lid is on vacuum tank.
2. Make sure the latchs connecting the vacuum
tank and the solution tank are secure.
3. Turn switch ON.
Lift Handle
Lid
EN
Vacuum Inlet
Quick Disconnect
- 5 -