How To Prepare The Machine For Operation; Uncrate The Machine; Installing The Brush Or Pad Holder - Clarke CFP Série Manuel De L'utilisateur

HOW TO PREPARE THE MACHINE FOR
OPERATION

UNCRATE THE MACHINE

When the machine is delivered, carefully inspect the
shipping carton and the machine for damage. If
damage is evident, save the shipping carton so that
it can be inspected. Contact the Clarke Customer
Service Department.
KNOW YOUR MACHINE (Figure 1)
1 Operator Handle Grips
2 Switch Lever Safety Lock Button
3 Switch Levers - Squeeze - ON / Release -
OFF
4 Handle Release Compression Lever
5 Power Cord
6 Operator Handle
7 Cord Hook
WARNING! This machine contains mov-
ing parts. To reduce the risk
of injury, always unplug the
power cord before servicing.

INSTALLING THE BRUSH OR PAD HOLDER

Align the lugs with the corresponding slots in the
brush or pad holder and turn the brush or pad holder
counterclockwise to lock it in place (figure 2). To
remove brush/pad holder, give it a quick, hard turn
clockwise.
CAUTION! Using the wrong brush or pad
on this machine can damage
the floor or overload the
motor.
®
Clarke
Operator's Manual (EN) - CFP Polisher
ENGLISH
1
2
7
4
5
Figure 1
Lugs
Slots
Figure 2
EN
3
6
- 7 -