• Only saw blades in accordance with
EN 8471 may be used with this saw.
• Saw blades that do not correspond
to the characteristic data specified
in this operating manual may not be
used.
• Ensure that all of the moving parts of
the saw blade protector are able to
move without catching.
• Only use sharp saw blades and suita
ble accessories.
• Never use grinding discs in the saw.
• Fix small wooden items in place firmly
before processing. Never hold them
by hand.
• Do not use flanges/flange nuts with
drilled holes that are larger or smaller
than those of the saw blade.
• Do not slow the saw blade by hand.
• The machine is not to be used for sta
tionary operation.
• When sawing, wear a dust protection
mask and goggles.
• Only use saw blades with diameters
in accordance with the labelling on
the saw.
• Only use recommended saw blades.
Safety notes for the laser marking aid
• Caution! If methods of operation
and adjustment other than those
described in the operating instruc
tions are used or other procedures
carried out, this may result in hazard
ous laser radiation effects.
5453700-Handkreissaege_man.indd 49
5453700-Handkreissaege_man.indd 49
• The power tool is supplied with warn
ing labels; these must be applied in
accordance with Figure 1 on page 2.
• Do not look into the laser beam.
Looking into the laser outlet from a
distance of 100 mm and with optical
instruments (e.g. magnifying glass or
microscope) may cause a risk of dam
age to the eyes.
• Do not point the laser beam at people
or animals.
• Do not use the laser beam on highly
reflective materials. There is a risk of
reflected light.
• Repairs to the laser marking aid may
only be carried out by specialists.
• Do not insert solid objects into the
laser lens (3).
• Clean the laser lens with a soft, dry
brush.
Meanings of the safety symbols
Read the operating instruc
tions!
Voluntary „geprüfte Sicherheit"
seal of quality (tested safety)
Housing is double insulated
Device meets the valid EU
regulations
Important! Wear safety gog
gles!
Important! Wear ear protec
tion!
49
09.07.20 11:28
09.07.20 11:28