Sonnenkonig Air Fresh 6 Mode D'emploi page 50

How to assemble:
1. Fix the four wheels [11] onto the base [10].
2. Install the fan body [9] on the base [10] and fasten the base nut [12].
3. Fasten the motor set [7] with the fixation screw [8]
4. Put the rear fan grille [6] onto the motor set [7] and fasten the grille mounting nut [5].
5. Install the blade [4] onto the motor shaft, then fasten the blade cap [3] with a twist
GB
anti-clockwise.
6. Loose the screw on the rear-mounted ventilation grille. Now fasten the front ventilation
grille and tighten it.
7. Close the vent pipe (14) to the ejection of the front ventilation grille (2).
Tank assembly
1. Open the water tank cover.
2. Lift the water tank evenly.
3. Take out the water tank evenly.
4. Make sure the tank stands in the correct position.
5. Open the lid of the tank and put water inside.
6. Place the lid back on tightly, re-install the tank into the fan and close the cover.
50