Intended Use - Hilti AG 500-12D Mode D'emploi Original

3 Description
3.1 Overview of the product
3.2

Intended use

The product described is a hand-held electric angle grinder. It is designed for cutting and grinding metal and
mineral materials, as well as brushing and sanding, without the use of water. It may used only for dry cutting
/ grinding.
The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its rating plate.
• The power tool may be used for cutting, slitting and grinding mineral materials only when equipped with
the corresponding guard (optional accessory).
• A dust removal hood together with a suitable Hilti vacuum cleaner must be used for working on mineral
materials such as concrete or stone.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
3.4 Starting current limiter
The electronic starting current limiter reduces the starting current drawn to prevent the line fuse from tripping.
This prevents abrupt start-up of the product.
3.5 Constant-speed electronics
Electronic speed control keeps running speed almost constant irrespective of whether the power tool is
idling or running under load. Constant running speed helps ensure maximum efficiency.
2143517
*2143517*
Printed: 20.04.2018 | Doc-Nr: PUB / 5300553 / 000 / 01
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
|
Spindle lockbutton
Air vents
Vibration-absorbing side handle
Wrench
Clamping nut
Kwik lock clamping nut (optional)
Cutting disc / grinding disc
Clamping flange
Guard
On/off switch
Switch-on interlock release button
Spindle
Quick locking system
Guard release button
Threaded bushing for handle
English 7