Samsung TW-J5500 Manuel D'utilisation page 13

+ The Bluetooth POWER Function
When the Bluetooth Power function is on and the
product is turned off, if a previously paired Bluetooth
device tries to pair with the product, the product turns on
automatically.
1. Press the Bluetooth POWER button on the remote
control while the product is on.
2. ON-BLUETOOTH POWER appears on the
SoundTower's display.
● ● Available only if the product is listed among
the Bluetooth device's paired devices. (The
Bluetooth device and the product must have
been previously paired at least once.)
● ● The product will appear in the Bluetooth
device's searched devices list only when the
product is displaying [READY].
● ● In the TV SoundConnect mode, the product
cannot be paired to another Bluetooth
device.
+ To disconnect the Bluetooth
device from the product
You can disconnect the Bluetooth device from the
product. For instructions, see the Bluetooth device's user
manual.
● The product will be disconnected.
● When the product is disconnected from the
Bluetooth device, the product will display
DISCONNECTED on the front display.
+ To disconnect the product from
the Bluetooth device
Press the SOURCE button on the remote control or
press the ( ) button on the product's front panel to
switch from BLUETOOTH to another mode or turn off
the product.
● The connected Bluetooth device will wait a certain
amount of time for a response from the product
before terminating the connection. (Disconnection
time may differ, depending on the Bluetooth device)
● ● In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between
the product and the Bluetooth device
exceeds 16.25 ft. (5m).
More About Bluetooth
Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect easily with each other
using a short wireless connection.
● A Bluetooth device may cause noise or malfunction,
depending on usage, when:
- A part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the product.
- It is subject to electrical variation from
obstructions caused by a wall, corner, or office
partition.
- It is exposed to electrical interference from same
frequency-band devices including medical
equipment, microwave ovens, and wireless
LANs.
● Pair the product with the Bluetooth device while they
are close together.
● The further the distance between the product and
Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
● In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
● The Bluetooth connection only works when it is close
to the unit. The connection will be automatically cut
off if the Bluetooth device is out of range. Even within
range, the sound quality may be degraded by
obstacles such as walls or doors.
● This wireless device may cause electric interference
during its operation.
13
FUNCTIONS