Crosscall X-POWER Mode D'emploi page 7

liquids other than water (salt water, chlorinated water, oils, hydrocarbons,
mud, etc.) be sure to rinse the connectors thoroughly with clean water
before drying them.
SAFETY AND USE OF THE BATTERY:
• Use with the correct charger
• Do not connect to the USB-A and USB-C ports at the same time.
• Do not throw into fire
• Do not incinerate
• Do not short-circuit
• Do not expose to temperatures above 60ºC / 140°F or direct sunlight
• Recycle according to the standards in force
WARNING:
• Small parts may cause choking.
Avoid extreme temperatures. Do not keep your device in extremely hot or
cold places.
• Do not attempt to disassemble or modify this product or any of its
components.
• Avoid impacts or damage to your Charger.
• Avoid using the connector to perform several actions and ensure that the
terminals of the battery do not touch any conductive elements, such as metal
or liquid.
In the event of accidental immersion of
your X-POWER, even if it is guaranteed
waterproof within the limits of product
standards, residual moisture may remain
behind the connectors. Shake your product
to drain the water, and then dry the
connectors with a soft, dry cloth before
using it again.
If one of the devices has been exposed to
5