Table des Matières
Publicité
5
Control
45
Tube characteristics
46
Slump / delivery note
47
Machine number
48
Comments
49
CFA/Kelly mode
4A
To send E-Mails
4B
Printer (TP110)
Choice of lifting type (controls activated only if the B2xxx is connected to
the winch)
51
Concrete targets
52
Adj. Auto lifting valve
53
Mast positioning
beginning of the pile (yes/no)
Dimensions of auger interior tube.
Choose "Yes" if you wish to record the
"Slump" and the "Delivery note" of concrete
on the MEMOBLOC (Yes/No)
Enter machine number
8 comments available
Utilization of TARALOG in flight auger (CFA)
or Kelly.
Sending of pile by E-mail with the MEMOTEL.
−
−
Choice of print-out on TP110 : Manual or
Auto-Manual (option) (menu L9)
−
−
Choice of the finish mode of the pile
graphic:
▪
▪
Overbreak limits for the different layers (5
layers)
•
Reference parameter for automatic lifting
"ON/OFF" / "Proportional" (menu L23)
•
To set coefficient for the TARALOG to
reach more or less quickly setting speed.
•
Valve state when there is no power supply
(open / close).
•
Adjustment of the PWM frequency for the
proportional control.
•
Adjustment of the proportional control.
Configuration of automatic mast positioning
(option).
65
Flat : the pile graphic is stopped
as soon as there is not recorded
volume anymore - the top of the
pile is flat.
Averaged : the pile graphic is
averaged on all the height of the
pile - the top of the pile is reduced
progressively.
Publicité
Table des Matières
