Error Message - JEAN LUTZ TARALOG Mode D'emploi

MEMOLEC
SCU
R
eader for the MEMBLOC SC memory card. It transfers data from MEMOBLOC SC to the P.C. by USB
connection.
The transferring process is performed by in the computer residing exploitation programs, reference : EX... (EXEPF,
EXTCT, EXPFW, EXLTPF etc.).
¾
The MEMOLEC SCU needs specific drivers to work under Millenium, 2000, XP. These drivers have to
be set the firs time you connect the MEMOLEC SCU and for each USB serial port of the computer
¾
When you connect the MEMOLEC SCU to the computer for the first time, Windows displays a window
asking drivers site for MEMOLEC SCU
¾
Indicate drivers site (Jean LUTZ S.A. has provided a 3.5" disk, a CD Rom, a file copied on hard disk)
then press on
¾
The MEMOLEC SCU is ready for data transfer.
¾ Connect MEMOLEC SCU to USB device port
¾ Insert a MEMOBLOC, into the MEMOLEC according to the arrows and symbols.
¾ Switch the MEMOLEC on. The number of recordings will be displayed.
¾ Read the MEMOBLOC by starting the exploitation software.
"MEMO IS OUT »
"PROBLEM MEMO"
Press once the red button MENU. The following message will appear
Attention
: After the MEMOBLOC'S reset to zero, the total data of MEMOBLOC are lost.
Language displayed on the MEMOLEC SCU is the one selected in the software.
bottom.
MEMOBLOC is absent or badly inserted. Check the way of the MEMOBLOC insertion.
MEMOBLOC is defective. Contact JEAN LUTZ S.A.
CLEARING MEMOBLOC
Clear MEMOBLOC ?
Validate by pressing a second time the red MENU button.
Clear MEMOBLOC ?
Please wait
The clearing takes about 20 seconds.
After the MEMOBLOC clearing the following message appears :
2 rue du Forbeth – 64110 JURANÇON – France
Tél. (33) 05 59 06 34 22 – Fax (33) 05 59 06 15 99 – Email :
SETTING UP
USING
Measures :
14

ERROR MESSAGE

Clear MEMOBLOC ?
to validate
→ → → → → → → → → → → → → → → →
Clear MEMOBLOC ?
To confirm
→ → → → → → → → → → → → → → → →
No measures !
contact@jeanlutzsa.fr 03-53GB.doc