Dust Extraction - Fein AFMM14 Mode D'emploi

OBJ_BUCH-0000000029-001.book Page 13 Wednesday, February 16, 2011 8:27 AM

Dust extraction

Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the dust extraction. (figure 6)
Afterwards, insert the desired application
tool. (figure 7)
Slide the battery onto the power tool again
and connect a vacuum cleaner. (figure 8)
en
13