Led Indicators And Control Panel - Grundig GFTU 13110 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
5.5 LED indicators and
control panel
LED indicators in the front section
of your refrigerator are intended
to help you in monitoring the
operation of your appliance.
Keep your food in the refrigerator
in a safe manner by monitoring
and using these LEDs and controls
as explained below:
Fast Freeze Button (1):
Used to freeze the food fastly.
Compressor may not operate
immediately but after some time
when the button is pressed and
this is quite normal.
Thermostat Setting Button (2):
Used to set your refrigerator
between minimum and maximum
values.
The appliance may go to OFF
position when the knob is adjusted
below MIN. When the green
indicator light is OFF, the appliance
is turned OFF also.
Once it is turned OFF (even for
defrosting), please adjust the knob
somewhere above MIN to be sure
that it is turned ON again. When
the appliance is turned ON, the
green indicator will light up.
20
2
5
4
Orange LED (3):
Lights up when the fast freeze
button on the LED panel is
pressed. In this case, your
refrigerator operates continuously.
Press the button again when the
food you would like to fast freeze
comes to the desired temperature
and the orange LED will turn off.
Green LED (4):
Lights up continuously after
plugging in your refrigerator.
Red LED (5):
It warns you by lighting
up continuously when your
refrigerators start to operates,
if not enough cooling effect is
obtained, when the door remains
open for a long time and when
excessive food is loaded.
If the red LED lights up
continuously when the conditions
stated in the adjacent column do
not exist, then call our Authorized
Service.
3

Publicité

Table des Matières
loading

Table des Matières