Bluetooth - AGPtek M30 Mode D'emploi

is flashing. Then press the button
passage from time A to B will be repeated automatically. The icon for A-B indication will
appear on the screen. Press button
- Replay times. Set the replay times from 1 to 10.
- Replay intervals. Set the replay interval from 1 to 10 (seconds).
 "Add to playlist"/"Remove from playlist". Choose to add to or remove from the 3 playlists.
 "Resume". Help you to return to the position before the manual switch song.
 "Bookmarks". Choose to add, delete or go to bookmark.
 "Delete". Choose to delete the song that is playing now.

Bluetooth

Find "Bluetooth" on Home menu and press button
 Bluetooth On/Off. Choose to enable or disable Bluetooth.
 Bluetooth On/Off memory. Choose On if you want to reconnect with devices connected
before by Bluetooth automatically when next time you turn on the player.
 Search for device. When the Bluetooth is enabled, choose "Search for device" to search the
nearby devices, then all of the devices which has opened its Bluetooth will be listed.
 Device List. Choose from the available devices and select to connect/disconnect.
Note: Please turn on the Bluetooth of the device you want to connect to at first.
The AGPTEK-M30 can remain connected to the Bluetooth device until you turn off the Bluetooth
function. When you are not using the Bluetooth function, turn off the Bluetooth.
Note: In the following circumstances, the pairing information will be deleted. Please pair again.
1. One or both of the devices are reset to factory settings.
2. The pairing information is deleted from the device(eg. when servicing the device).
3. If the paired devices are more than 10, AGPTEK-M30 will delete the earliest connected
device.
4. If the pairing time is over before it is done, please try again.
5. There are some restrictions on outputting sound through Bluetooth connection.
6. Even if you connect a headphone to the headphone jack, no sound is output from the
headphone. The sound will be output from the Bluetooth device.
Note: Bluetooth connection will be automatically disconnected in the following situations:
1. The battery of the AGPTEK-M30 or Bluetooth device is exhausted.
2. The AGPTEK-M30 or Bluetooth device is turned off.
3. The AGPTEK-M30 or Bluetooth device is too far away or blocked.
4. When the Bluetooth connection is enabled, the sound settings(Equalizer & Variable speed
playback) will not work.
FM radio
Find "FM radio" on main menu with the button
While it's on radio playing interface, click
tune, Presets, Save to preset, Clear preset, Turner Region Start FM recording, FM Library.
to set the ending time B when B is flashing. The
again to back to normal playback.
to access to its function.
to enter to its function.
to access to its submenu which includes: Auto
9