Bluetooth - AGPtek H9 Mode D'emploi

broadcasting to confirm whether the FM signal is covered or not.
3．FM radio supports listening with the wired earphones connection/Bluetooth
connection.
(1) Wired earphones listening. Before turning on the FM radio, you should connect to
the wired earphones for listening;
(2) Bluetooth connection listening. You can use wired earphones or
antenna to receive the signal, and then connect Bluetooth devices.

Bluetooth

Find "Bluetooth" on Home menu and tap to access to its function.
 Bluetooth On/Off. Choose to enable or disable Bluetooth.
 Search for device.
When the Bluetooth is enabled, choose "Search for device" to search the nearby
devices, then all of the devices which has opened its Bluetooth will be listed.
 Device List.
Choose from the available devices and select to connect/disconnect. Select the device
you want to connect, and then click to connect. After successfully connected, this
player is ready to play music or FM radio by Bluetooth earphones, Bluetooth speaker,
etc.
Note:
Please open the Bluetooth of the device at first if you want to connect with the player.
Recordings
Find "Recordings" on the Home menu, tap button to access to its function. The
related list will show, including: Start Voice Recording, Recordings Library,
Storage(only available when memory card inserted), Record Format, Record settings,
Record Source.
Note: Record source: you can choose microphone and "line-in".
"Line-in" record function: Turn on the "Line in" record function, connect two MP3s with
LINE IN cable or use MP3 to connect other devices with output functions (such as
mobile phones) to record audio files.
5