3
PREPARATIONS
3.1
Remove packaging
1.
Remove packaging from the heater.
2.
Check the contents for any damage.
3.
Read the instructions for use.
3.2
Installation
1.
Check whether the heater is
connected to the
voltage/frequency.
WARNING
Do not connect the heater if the
voltage/frequency deviates from the
values as listed on the nameplate.
WARNING
Check the airflow (zie 2.7)
WARNING
Changing the phases will chance the
airflow direction.
2.
Make sure that the heater has a
stable setup with both wheels on the
floor.
TBD 18
THERMOBILE INDUSTRIES BV
correct
4
USE
4.1
Switching on
• Ventilate:
Only set the selector switch for ventilation to
1. The thermostat will not become active.
• Heat:
Only set the required switch(es) for heating
to 1. Set the thermostat for the required
ambient temperature.
• Heating and continuously ventilate:
Set the switch for ventilating to 1. -Set the
required switch(es) for heating to 1.
After the thermostat has switched off the
heating, the fan will keep running.
4.2
Switch off
1.
Set all switches to 0.
2.
Leave the plug in the socket another 5
minutes to make sure it automatically
cools down.
13