Formatting The Micro Sd Card; Setting The Resolution; Taking Photographs - Rollei Sportsline 60 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

5.3 Formatting the micro SD card

1. Press the menu button (
2. Select the setup mode by press the right button.
3. Select the format icon by press the
confirm.
4. Select SD card and confirm with the SHUTTER button.

5.4 Setting the resolution

The camera can be set to different resolutions.
1. Press the menu button (
press the SHUTTER to confirm.
Resolutions: VGA (640 x 480), 1.3M (1280 x 960), 3M (2048 x 1536),
5M (2560 x 1920), 8M (3264x2448), 12M (4032 x 3024)
2. Six different resolutions will be displayed. Select the desired resolution by using the up or down
buttons and press the SHUTTER button to confirm the selection.

5.5 Taking photographs

1. Turn on the camera.
2. Depending on the distance to the object being photographed, use macro switch to adjust
the distance. Select the flower symbol (
(11cm –18 cm).
If you wish to take a video or a photograph of surroundings or people (0.5m – infinity), set the
macro switch to normal mode (
3. If you are not sure if there is enough lighting, turn on the automatic flash(
flash button. (If the battery power is too low, the flash won't be activated).
4. Use the LCD screen to aim the object you wish to take photograph.
Face detection function will be activated automatically if you take pictures of persons.
5. Press SHUTTER button and wait until the LCD display turn on again.
6. If 'SMILE' detection is ON, shutter will be activate automatically once a smile face is
detected
Caution: 1) Taking picture for fast-moving object is not recommended.
2) Image may be distorted when taking picture in a moving vehicle.
5.6 Zoom in and out
The camera can zoom in up to 8 times.
Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the
maximum zoom ratio.
5.7 Self-timer setting
You can use the self-timer function when you take a photograph of yourself or when you take a
photograph without flash of an object. To avoid shaking of the camera a tripod is recommended.
1. Set the camera to photo mode.
2. Press the MENU button (
W
3. Press the
(
button.
W
4. Press the
(
5. Press the SHUTTER button to confirm. The self-timer function is now ready for use.
6. Aim at the object you wish to take photo.
7. Press the SHUTTER button to take a photograph.
) in PHOTO or VIDEO mode.
W
) in PHOTO mode, select the resolutions icon by
).
). The menu will appear.
) button to select Capture Mode and confirm by pressing the SHUTTER
) button to set the delay time: 10S Timer.
(
) button and press the SHUTTER button to
) if you wish to take a close-up photograph
W
(
) key and
) by pressing the

Publicité

Table des Matières
loading

Table des Matières