Transport; Positioning/Work Station; Electrical Connection - Femi N215XL–2200XL Instructions Pour L'utilisation

EN
NOTE - Machine weight:
For information on the weight of the machine described in this manual, please refer
to the relative document with all the technical details provided as an appendix
to this manual.
DANGER - WARNING
- NEVER ATTEMPT TO MOVE OR LIFT THE MACHINE MANUALLY.
- TO MOVE THE MACHINE LOWER THE SAW BODY TO THE END OF STROKE
AND SECURE IT IN THIS POSITION BY TYING IT TO THE CLAMP SCREW
USING ROPES OR TIES.
- ALL OPERATIONS TO MOVE AND LIFT THE MACHINE USING A FORKLIFT
TRUCK OR HOIST, MUST BE PERFORMED BY ADEQUATELY TRAINED
PERSONNEL WITH THE RIGHT REQUISITES FOR THE JOB.
2.3.

TRANSPORT

DANGER - WARNING
TO ENSURE SAFE TRANSPORT OF THE MACHINE FROM ONE WORK PLACE
TO ANOTHER, REPLACE IT IN ITS ORIGINAL PACKAGING.
2.4.

POSITIONING/WORK STATION

a. Secure the machine to the pedestal using the screws provided. The surface on which the
machine is placed must be big enough to guarantee machine stability at all times (Fig.
2).
DANGER - CAUTION
Machine positioning in the work area must be performed ensuring a clearance of
at least 900÷950 mm on all sides of the machine (see Fig. 2).
b. Position the machine in a work area with adequate lighting.
c. Secure the pedestal to the ground using rawl bolts (not provided). Diameter of the pedestal
hole = 10 mm.
2.5.

ELECTRICAL CONNECTION

Safety Standards for electrical connections
- Check that the electric supply system to which the machine is to be connected is earthed
in accordance with the relative safety regulations in force.
DANGER - WARNING
C H E C K T H AT T H E P O W E R S U P P LY S Y S T E M I S E Q U I P P E D W I T H A
THERMOMAGNETIC CIRCUIT BREAKER TO PROTECT ALL CONDUCTORS
FROM SHORT CIRCUIT AND OVERLOADS (SEE APPENDIX).
28
Cont....