Installation; Location And Ambient Room Temperature Limits; Leveling Of Appliance - Furrion FCR20ACAFA-SS Manuel D'instructions

Installation

This section explains the installation of the
new appliance before using it for the first
time. We recommend reading the following
tips.
WARNING
For proper installation, this refrigerator must be placed
on a level surface of hard material that is the same
height as the rest of the flooring. This surface should be
strong enough to support a fully loaded refrigerator, or
approximately 294 Ibs (133 kg).When moving, be sure
to pull out and push back the unit in straight.(Fig. 1)
Fig. 1
Location and Ambient Room
Temperature Limits
It's essential to find a suitable place to locate
your new appliance to ensure its efficient
operation. Please consider the following
instruction for your appliance:
• Install the appliance in a dry and low
moisture area. The best range of ambient
temperature for the appliance is 55 °F to
110 °F.
• Keep the appliance away from heat
sources, such as stoves, fireplaces or
heaters .
• Keep the appliance out of direct sunlight
and rain.
Class Symbol
Extended
Temperate
Temperate
Subtropical
Tropical

Leveling of Appliance

For proper leveling and to avoid vibration,
this appliance is provided with adjustable feet
in front. Please adjust the level by following
below instructions: (Fig. 2)
1. Roll the refrigerator into place.
2. Turn the adjustable feet (with your fingers
or a suitable spanner) until they touch the
floor.
3. Tilt the top backwards about 25/64-19/32
inches (10-15 mm) by turning the feet
turns further. This will allow the
1-2
doors to self-close and seal properly.
4. Whenever you want to move the
remember to tum the feet
appliance,
back up so the appliance can roll
freely. Reinstall the appliance when
relocating.
Front roller
Adjustable foot
Fig. 2
Ambient
Temperature
range(°F)
SN 50 to 90
N
61 to 90
ST
61 to 100
T
61 to 109
Rear roller
6