Operation; Controlling The Temperature; Display Controls - Furrion FCR20ACAFA-SS Manuel D'instructions

Operation

All functions and controls of the unit are accessible from a control panel conveniently located
on the door of the refrigerator. A keypad of touch buttons and a digital display allow easy
configuration of features and settings in a simple and intuitive manner.
Important! Touch buttons require only a short press on a button to operate. The operation
occurs when releasing your finger from the button, not while the button is pressed. There is
no need for applying pressure on the keypad. Child Lock function related to the "Alarm" button
requires a long touch of a least 3 seconds. Please refer to those related sections of this manual
for detailed instructions.
The control panel consists of two indicating temperature areas, five icons representing different
modes and six touch buttons. When the appliance is powered on for the first time, the backlight
of the icons on display panel turns on. If no buttons have been pressed and the doors remain
closed, the backlight will turn off after 60 seconds.

Controlling the temperature

We recommend that when you start your refrigerator for the first time, set the temperature to 5
°C (41 °F) and the freezer to -18 °C (-O.4 °F). If you want to change the temperature, follow the
instructions below.
When you set a temperature, you set an average temperature for the whole refrigerator cabinet. Temperatures inside
each compartment may vary from the temperature values displayed on the panel, depending on how much food you
store and where you place them. Ambient temperature may also affect the actual temperature.

Display controls

7
6
3
2
CAUTION
5
4
10