Installation Instructions; Reversing The Door Swing - Furrion FCR43ACA-BL Manuel D'instructions

Installation Instructions

Reversing the Door Swing

Your refrigerator is designed with a
reversible door. You have the choice of
either opening it from the left or the right
side. When reversing the door swing:
• Read the instructions all the way
through before starting.
• Handle parts carefully to avoid
scratching paint.
• Set screws down by their related
parts to avoid using them in the
wrong places.
• Provide a non-scratching work
surface for the doors.
IMPORTANT: Once you begin, do not
move the cabinet until door-swing
reversal is completed.
These instructions are for changing the
hinges from the right side to the left side
- if you ever want to change the hinges
back to the right side, follow the same
instructions and reverse all references
to left and right.
7
Item
1 Upper Hinge Cover
2 Upper Hinge Screws
Upper Hinge
3
Adjustable Foot
4
Lower Hinge
5
Lower Hinge Screws
6
Door
7
1. Pull to remove the Upper Hinge Cover.
2. Remove the two Upper Hinge Screws
using a Phillips screwdriver. Remove
the Upper Hinge and set aside.
3. Slightly lie the refrigerator down
on the floor. In case of scratch, it is
recommended to put the refrigerator
on a soft surface.
4. Remove the two adjustable feet.
5. Remove the two Lower Hinge Screws
using a Phillips screwdriver. Remove
the Lower Hinge and set aside.
6. Secure the door swing on the left side
of the refrigerator using the hinges
and screws provided.
7. Replace the two Adjustable Feet and
the Upper Hinge Cover.
8. Set the refrigerator upright and
leave it to stand for 30 minutes at
least to allow the refrigerant to flow
into the compressor. Otherwise the
compressor may be damaged.
Part Name