Interior Cleaning; Door Seals Cleaning - Furrion FCR20ACAFA-SS Manuel D'instructions

Operation

Interior cleaning

• You should clean the appliance interior
regularly. It will be easier to clean when
food stocks are low. Wipe the inside of
the refrigerator freezer with a weak
solution of bicarbonate of soda, and then
rinse with warm water using a wrung-
out sponge or cloth. Wipe completely
dry before replacing the shelves and
baskets. Thoroughly dry all surfaces and
removable parts.
• Although this appliance automatically
defrosts, a layer of frost may occur on the
freezer compartment's interior walls if
the freezer door is opened frequently or
kept open too long. If the frost is too thick,
choose a time when the supply of food
stocks are low and proceed as follows:
− Remove existing food and accessories
baskets, unplug the appliance from
the mains power and leave the doors
open. Ventilate the room thoroughly to
accelerate the thawing process.
− When defrosting is completed, clean
your freezer as described above.
CAUTION
Do not use sharp objects to remove frost from the
freezer compartment. Only after the interior is
completely dry should the appliance be switched back
on and plugged back into the mains socket.
15

Door seals cleaning

Take care to keep door seals clean. Sticky
food and drinks can cause seals to stick
to the cabinet and tear when you open the
door. Wash seal with a mild detergent and
warm water. Rinse and dry it thoroughly after
cleaning.
CAUTION
Only after the door seals are completely dry should the
appliance be powered on.
WARNING
The LED light must not be replaced by the user! If the
LED light is damaged, contact the customer helpline
for assistance.