Signature SFDOOR4802BG Instructions D'utilisation page 53

Interior cleaning
You should clean the appliance interior regularly. It will
be easier to clean when food stocks are low. Wipe the
inside of the fridge freezer with a weak solution of
bicarbonate of soda, and then rinse with warm water
using a wrung-out sponge or cloth. Wipe completely
dry before replacing the shelves and baskets.
Thoroughly dry all surfaces and removable parts.
Although this appliance automatically defrosts, a layer
of frost may occur on the freezer compartment's
interior walls if the freezer door is opened frequently or
kept open too long. If the frost is too thick, choose a
time when the supply of food stocks are low and
proceed as follows:
1. Remove existing food and accessories baskets,
unplug the appliance from the mains power and
leave the doors open. Ventilate the room thoroughly
to accelerate the thawing process.
2. When defrosting is completed, clean your freezer as
described above.
Caution!
Don't use sharp objects to remove frost from the
freezer. Only after the interior completely dry should
the appliance be switched back on and plugged
back into the mains socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and
drinks can cause seals to stick to the cabinet and tear
when you open the door. Wash seal with a mild
detergent and warm water. Rinse and dry it
thoroughly after cleaning.
Caution! Only after the door seals are completely dry
should the appliance be powered on.
-51-