Installing The Cleaning Tools; Mounting The Chains - Wohler Snap & Sweep Mode D'emploi

7

Installing the cleaning tools

7.1

Mounting the chains

Fig. 14: Parts of the push head adapter
Fig. 15: Fixing the chains to the clamping
part
Fig. 16: The chains are fixed with the
clamping part and the star grip screw.
Unscrew the parts of the push head adapter.
•
Place the clamping part on a straight surface.
•
• Hang the last chain link over a pin. Up to 6
chains can be attached.
Place the rotating base on the clamping part
•
so that the pins are inserted into the holes.
Screw the star grip screw onto the clamping
•
part and the rotation base.
Installing the cleaning tools
EN
31