Napoleon P-E Série Instructions D'installation Et D'opération page 39

5.2.3 Blower Removal
41
Remove heating module.
Refer to steps 1-16 from "Heating
Module Removal" section.
43
Remove 10 round head and 6 hex head screws.
45
Remove Molex connector from the
front blower plate.
47
Remove electrical plate (with capacitor
and contactor on it).
42
Remove seven screws along the back.
46
Remove 10 screws from the front blower plate and electrical plate
(with capacitor and contactor on it).
48
Cut weather stripping at the right corner.
44
Remove top blower plate.
49
Lift and remove blower from cabinet.
W415-2288 / 08.29.2019
39
IOM