Handling The Device - Philips Lumea SC2009 Mode D'emploi

18 English
5
4
3
2
1
Skin type
I
II
III
IV
V
VI

Handling the device

2 To adjust the light intensity setting, press the intensity increase button
or the intensity decrease button until you have reached the required
setting.
3 Lumea should never be painful. If you experience discomfort,
reduce the light intensity setting.
4 After recent tanning, perform a skin test to determine the right light
intensity setting.
Skin tone
White; You always sunburn, never tan.
Beige; You easily sunburn,
tan minimally.
Light brown; You sunburn easily,
tan slowly to light brown.
Mid brown; You rarely sunburn,
tan easily.
Dark brown; You rarely sunburn,
tan very easily.
Brownish black or darker; You rarely or
never sunburn, very dark tanning.
Note: To check if your skin type allows usage of the device, consult the skin
tone table with number 2 on the foldout page.
Note: Your skin may react differently on different days/occasions for a
number of reasons.
1 Before use, charge the device, clean the attachments and the light exit
window and select the right light intensity for your skin tone.
2 Place the device at a 90° angle on the skin so that the attachment and
the safety ring are in contact with your skin.The safety ring prevents
unintentional flashing without skin contact.
Light intensity setting
4/5
4/5
4/5
3/4
1/2/3
You cannot use the device