Erasing A Loop-Recorded Phrase - VOX Amplification Dynamic Looper Manuel D'utilisation

Erasing a loop-recorded phrase

Here's how to erase a phrase that you've recorded on a loop.
The erased phrase cannot be recovered. Use this
operation with caution.
1. If a phrase is playing, press the STOP pedal to stop
playback.
The LOOP STATUS LED will blink green.
2. Simultaneously press the STOP pedal and the
PROGRAM UP pedal to select the loop whose phrase
you want to erase.
Make the current loop LED light-up for the loop whose
phrase you want to erase.
3. Hold down the STOP pedal for approximately two
seconds.
The phrase of the selected loop will be erased, and the
LOOP STATUS LED will go dark.
If you once again hold down the STOP pedal for
approximately two seconds, the phrase of the other loop
will be erased, and the LOOP STATUS LED will go dark.
Erasing a loop-recorded phrase
27