Installation And Connection; Installation Illustration - Hydro-Pro+ premium 7 Manuel D'installation & D'instructions

3.

INSTALLATION AND CONNECTION

3.1. Installation illustration

Water inlet Water pump Valve
Sand filter
Water supply
(or other type filter)
Pool
Chlorinator cell Water outlet
Installation items:
The factory only provides the main unit and the water unit; the other items in the illustration
are necessary spare parts for the water system, that provided by users or the installer.
Attention:
Please follow these steps when using for the first time
1. Open valve and charge water.
2. Make sure that the pump and the water-in pipe have been filled with water.
3. Close the valve and start the unit.
ATTN: It is necessary that the water-in pipe is higher than the pool surface.
4