Mode Of Operation; Maintenance And Environmental Protection; Service Instructions - Meister EF600M Traduction Du Manuel D'utilisation Original

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
9 – Mode of operation
Cutting tiles
Cut with the decorated side upward.
Always use a light but even pressure
when pressing the work-piece against
the blade edge, even if the resistance
increases.
Do not run the tool for long
S2 : 10 min
periods at a time. To avoid
overheating the tool should not be kept
switched on for longer than 10 minutes at
a time. Allow the tool to cool down
between whiles.
10 – Maintenance and envi-
ronmental protection
CAUTION! Pull the plug before
making any settings, carrying out
repairs or maintenance.
After use clean the tool with a damp
cloth only. Empty and clean the water
reservoir. Treat non-stainless parts with
an anti-corrosive agent.
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the house-
hold waste! They are to be collected
separately, in accordance
with the 2012/19/EU
directive for the disposal of
electrical and electronic
waste, and sent for proper
and environmentally-
friendly recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
38
5461060-Fliesenschneidemaschine-man.indd 38
5461060-Fliesenschneidemaschine-man.indd 38
details, please contact your municipal
authority concerned.
11 – Service instructions
• Store the machine, instruction manual
and where necessary the accessories
in the original packaging. In this way
you will always have all the informa-
tion and parts ready to hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Do not
drop electrical machines in water.
Please note additional hints given in
the operating instructions.
• Meister devices are subject to strin-
gent quality control. If however a
functional fault shoult occur, send the
device to our servicing address. The
repairs will be carried out in a short
time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee docu-
ment and the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
PLEASE NOTE! Opening of the
device invalidates the guarantee
claim!
IMPORTANT! We point out
expressly that in accordance
with the Product Liability Act we do
not take responsibility for any dam-
age caused by our appliances, in so
much that said damage is caused by
improper repair, or original parts or
29.10.20 07:53
29.10.20 07:53

Publicité

Table des Matières
loading

Table des Matières