CASO DESIGN Sound & Cool Mode D'emploi Original page 44

2) External audio mode/ AUX mode
"USB" is displayed. Connect the your device to upper USB port. The Sound & Cool supports
MP3/WMA/APE/FLAC/WAV Voice prompts "USB Mode". The
Sound & Cool will play ythe music from your USB device.
When the connection is disconnected the voice prompts this
"USB is disconnected."
Only the upper USB port is suitable for playing of music.
Pause of Music
To pause the music player you have 2 options:
 Press Pause/Play on your external device (your mobile/tablet).
 Press
for 3 seconds to unlock the control panel and again to pause the music
player. The display shows:
shows:
Selection of music title
Press for 3 seconds to unlock control panel. With > you can select the next song,
the display shows „-I" for 2 seconds. With < you can select the previous song, the display
shows „I-„ for 2 seconds.
After 2 seconds the display returns to audio mode.
In external audio mode/AUX mode you cannot use the < and > on the control panel.
The display shows „LINE" and the voice
prompts: "external audio mode". The
Sound & Cool can be used as external
audio of your mobile / tablet by inserting
a 3,5 mm audio cable for connection with
your mobile/tablet. Then you can control
the music using your mobile/tablet.
In this mode the control panel of the
device cannot be used for switching to
previous/ next title, use yor mobile/tablet
for this.
3)
. With you can restart the player and the display
USB mode
44