System Reset; Parking Brake Inhibit - Audiovox VME 9425 Mode D'emploi

System Reset

To correct a system halt or other illegal operation, use the tip of a pen to press the reset
button located on the front bottom-left corner of the unit behind the protecti e co er After a
system reset, the unit restores all factory default settings
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset
is complete.
Image/Display Settings
Video Output Modes
The follo ing table sho s the ideo output mode for each playing source
Playing Source
AM/FM TUNER
DVD
AUX IN
*CVBS – Composite Video Baseband Signal
Picture Adjustment
To adjust monitor display settings, perform the follo ing steps:
1 Press and hold the NAV button on the monitor to display the picture adjustment menu
The "BRIGHT" bar is highlighted in yello
2 Turn the rotary encoder to adjust the brightness setting le el
3 Press and hold the NAV button again The "CONTRAST" bar is highlighted in yello
4 Turn the rotary encoder to adjust the contrast setting le el
Press and hold the NAV button again to e it the picture adjustment menu

Parking Brake Inhibit

When the pink "Parking" ire is connected to the ehicle Parking Brake circuit, the front
TFT monitor ill display ideo hen the Parking Brake is engaged (When the pink ire is
grounded ia the Parking Brake circuit, ideo ill be displayed )
Video Output Modes
Video Output Modes
RGB Mode
YCbCr Mode
CVBS Mode
78