Accessories - Festo HGPP A Série Notice D'utilisation

HGPP-...-A
Replacing grippers:
Please note that readjustment is not usually necessary, when grippers are re-
S
placed by grippers of the same type with gripper fingers of the same type.
Exhausting the HGPP-... without protection against the load sliding down:
Warning
If there is a drop in pressure, the firmly
held work load will suddenly slide down.
S Make sure that the gripper is not holding
a work load when it is exhausted.
8

Accessories

Designation
Pressure build up valve
One-way flow control valve
Non return valve
Hall sensor
Evaluating electronics for Hall sensor
Inductive sensor
Support bracket for inductive sensor
Compressed air reservoir
Adapter kit
Oil viscosity group 32 (as per ISO)
Grease
– Metal on metal
– Seals
Fig. 25
28
Fig. 24
Type
HEL-... / HEM-...
GRLZ-... / GRLA-...
HGL-...
SMH-S1-...
SMH-AE..-...
SIES-Q5B-...
HGPP-HWS-...
VZS-...
HAPG-...
OFSW-32
Molycote DX
Molycote PG 75
Festo HGPP-...-A 0110a English