Cleaning And Care - Klarstein 10034158 Mode D'emploi

EN
30
Start button
After you have set the heat selection button and the timer, press the start
button. The program starts. If the door is opened during drying or there
is a power failure, the program stops. Close the door and press Start
again to continue with the program.
Note: The Start button is only intended to start the dryer. If you press it during drying,
the dryer will not pause. To stop the dryer, turn the knob to OFF.

CLEANING AND CARE

Note: Disconnect the plug from the socket before cleaning.
Removing the filter
Filter cover Lint filter
Remove the filter insert from the rear of the interior. The filter insert consists of 3 filters.
Filter cleaning
Lint filter
Lints
Separate the filters. Clean the filter cover, lint filter and exhaust filter with a soft brush
or vacuum cleaner. Be careful not to damage the filters.
Filter insert
Exhaust filter
Exhaust filter vacuum cleaner