Tips; Cleaning And Storage - Klarstein SHIRTBUTLER PRO Mode D'emploi

EN
20

TIPS

• The appliance is intended primarily for machine-spun laundry! If hand-washed
or non- machine-spun laundry is to be pressed, first allow it to dry out a little first.
• The drying / pressing process takes around 10 minutes for a spun-dried shirt.
However, the length of time can vary depending on the material and thickness
of the material. We recommend that you start with a shorter time and extend it if
necessary.
• The nylon balloon can be enlarged or reduced in size with the aid of the zip
fasteners. For smaller sizes, the zip fasteners should be closed. For larger sizes, the
zip fasteners should be opened on both sides.
• Wide-apart buttons may result in the button strip crimping slightly during
pressing. Here it is advisable to smooth down the button strip again by hand
immediately after the pressing process.

CLEANING AND STORAGE

• Pull the mains plug out of the plug socket and allow the appliance to cool down
completely before doing any cleaning!
• Never immerse the appliance, the mains cable or the mains plug in water or other
liquids!
• Do not use any corrosive or abrasive cleaning agents or cleaning pads to clean the
appliance. These can damage the surface.
• Clean the appliance and the nylon balloon if necessary with a slightly damp cloth
and a little mild detergent if required. Then wipe down fully with a dry cloth.
• Allow all parts to dry completely before you put them away.
• Store the appliance in a clean, dry place that is protected from sunlight and is not
accessible to children and animals.