Hardware Installation - TRENDnet TEW-436BRM Guide D'installation Rapide

2. Hardware Installation

1. Connect one end of the RJ-45 cable to one of
the TEW-436BRM's LAN ports. Connect the
other end of cable to the computer's Ethernet
port.
2. Connect one end of the RJ-11 cable to the
TEW-436BRM's ADSL port. Connect the other
end of the cable to the phone jack.
3. Connect the AC Power Adapter to the
TEW-436BRM and then to a power outlet.
4. Verify that the following panel lights are on:
Power, LAN, and WLAN. If the lights are not
on, press the Power ON/OFF on the back of
the TEW-436BRM.
ADSL
Terminator
10
To PCs
Power