Setting Up Encryption; Register Your Product - TRENDnet TEW-436BRM Guide D'installation Rapide

4. Setting up Encryption

Note: To protect your network from any unauthorized access it is recommended to
enable wireless encryption.
1. Click Setup -> Wireless -> Security.
2. This example below is WPA2-PSK. Select the
following:
Encryption: WPA2(AES) WPA Authentication
Mode: Personal (Pre-Shared Key) Pre-Shared
Key Format: Passphrase
Pre-Shared Key: Enter an encryption key.
For Example: trendnet
Then click Apply Changes. For WPA-PSK or
WPA2-PSK, the Pre-Shared Key must be
between 8 and 63 ASCII or 64 HEX characters.
Make sure to copy down the encryption key.
Your Configuration is complete
For detailed information regarding the TEW-436BRM's configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website
at http://www.trendnet.com.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
Thank you for choosing TRENDnet
www.trendnet.com/register
14