Hardware Installation - TRENDnet TEW-639GR 2.01 Guide D'installation Rapide

2. Hardware Installation

Note: Gather all information related to your Internet Connection before you start. If
necessary, contact your Internet Service Provider (ISP).
1. Verify that you have an Internet connection
when connecting your computer directly to the
Cable or DSL modem or Ethernet jack. Open
your browser (e.g. Internet Explorer) and type
in a URL (e.g. http://www.trendnet.com) in the
address bar.
2. Connect one end of a RJ-45 cable to one of the
TEW-639GR's LAN ports. Connect the other
end of cable to the computer's Ethernet port.
3. Connect one end of a RJ-45 cable to the
TEW-639GR's WAN port. Connect the other
end of the cable to your modem.
4. Connect the AC Power Adapter to the
TEW-639GR and then to a power outlet.
5. Move the Power switch to the on position.
6. Verify that the following panel lights are on:
Power, LAN, WAN and WLAN.
Internet
6
Cable/DSL Modem