Hardware Installation; For Windows Users - TRENDnet TEW-637AP Guide D'installation Rapide

2. Hardware Installation

Note: Locate an optimum location for the Access Point. The best place for the
Access Point is usually at the center of your wireless network. Please connect
the computer configuring the TEW-637AP to the same router. It is
recommended to use a wired computer to configure the TEW-637AP.

For Windows Users

1. Insert Driver CD-ROM into your
computer and then click Setup
Wizard.
2. Click I accept the terms in the
License Agreement and then click
Next.
3. Connect an Ethernet cable from
the LAN port on your Router to the
LAN port on the TEW-637AP.
4. Connect the AC Power Adapter to
the Access Point and then to a
power outlet and then click Next.
7
English