Hardware Installation - TRENDnet TEW-647GA Guide D'installation Rapide

2. Hardware Installation

Note: There are two methods for configuring the gaming adapter: Wi-Fi
Protected Setup (WPS) Push Button Setup or Manual Setup. If your wireless
router does not support WPS, go to section 2.2 Manual Setup. If your wireless
router does support WPS, please follow the directions in section 2.1 Wi-Fi
Protected Setup (WPS) Push Button Setup.
2.1. Wi-Fi Protected Setup (WPS) Push Button Setup
1. Plug the power adapter into the
TEW-647GA and then into an
available power outlet.
2. Press the WPS button on your
wireless router. The example
shows a TEW-639GR.
3. Press the WPS button on the
TEW-647GA. The WPS button will
start to blink.
4. Once the WPS button becomes
steady, the TEW-647GA has been
successfully configured.
11
English