Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE AND CLEANING INSTRUCTIONS
When the bench grinder is not in use and before
performing any maintenance work or accessories
replacement, unplug the power cord from the socket.
The bench grinder was conceived to operate over a long
period of time with a minimum of maintenance.
Cleaning and storage
Cleaning
After each use, clean all the components of the bench
grinder. Wipe the power tool with a clean, damp cloth
or blow it with low pressure compressed air.
Remove the debris accumulated inside the grinding
wheel guard with dry compressed air under low
pressure. Always wear safety goggle when doing this
operation.
Careful handling protects the power tool and extends its
service life.
Storage
The grinder must be fixed or stored in a dry place, as
well as the spare grinding wheels.
ENVIRONMENTAL POLICY
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your
household waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the
power tool through the person in charge for recycling in
your city.
CUSTOMER SERVICE
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Site:
www.centrallobao.pt
29
Publicité
Table des Matières
