Sonus Faber Gravis I Active Subwoofer - Sonus Faber GRAVIS II Manuel D'utilisation

Masquer les pouces Voir aussi pour GRAVIS II:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8.1 SONUS FABER GRAVIS I ACTIVE SUBWOOFER

Loudspeaker system
Woofer
Amplifier Type
Power amplifier (max)
Frequency response
@-6dB/@-3dB (in room)
Mains input voltage
Fuse
Fuse System protection
Controls
Additional features
Audio signal inputs
Power consumption
Finish
Dimensions (H x W x D)
Weight
Supplied accessories
Closed box loading, down firing active subwoofer
1 x 210mm (8") very long throw, treated paper cone, wide rubber surround
woofer
High linearity Class AB
150 W rms, 250 W (peak)
From 30/40 Hz to Fc (user adjustable)
Factory selected, 120Vac - 60Hz or 230 Vac - 50 Hz
T4.0A (110Vac, 60Hz); T2.0A (230V, 50Hz)
Output signal short circuit
Over-heating
DC fault
Independent Master and LFE volume controls;
Continuously adjustable Crossover frequency (30 to 120Hz),
slope 24dB/oct;
Signal phase inversion switch (0/180°)
Auto switch-on/off (deselectable)
LFE (Low Frequency Effect), single phono plug;
Line level signal, single phono plug;
High level signals, Neutrik 4-pole Speakon©
0.5 W (Stand-by)
250W (Rated power)
Matte White, Piano Black, Wood
334 x 286 x 316 mm including feet
13.1 x 11.2 x 12.4 in including feet
14.5 Kg
32 lb
User manual
AC Power cord
10m/32.8 ft Neutrik Speakon© interconnection cable
62

Publicité

Table des Matières
loading

Table des Matières