Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
Phase switch: set the output signal polarity. This helps in choosing the most appropriate low
frequency distribution across the listening room.
2.
Auto switch: when this switch is in the AUTO position, the subwoofer automatically switch on
or off depending on the presence of the input signal(s).
3.
Crossover knob: adjusts the bandwidth of the subwoofer by setting the low-pass cut off
frequency.
4.
Hi/Low Level: adjusts the volume when the Line (RCA plug) or Speaker Level (Speakon ©
connector) inputs are used.
5.
.1/LFE Level: adjusts the volume when the LFE (RCA plug) input is used.
6.
LFE Input: by using an RCA terminated cable, allows the connection of the subwoofer to the
LFE (Low frequency Effects) output of an AV player (DVD, Blu-ray, etc) or a home theatre
controller/preamplifier. The upper frequency limit for this input is fixed at 120 Hz.
7.
Line Input: by using an RCA terminated cable, allows the connection of the subwoofer to the
line output of an AV player (DVD, Blu-ray , ecc.) or amplifier. The upper frequency limit for this
input is variable and is set by the subwoofer's crossover knob.
8.
Speakon © Connector: by using the supplied cable, allows the connection of the subwoofer
to the speaker outputs of a stereo integrated or power amplifier. The upper frequency limit for
this input is variable and is set by the subwoofer's crossover knob.
9.
Mains plug, switch and fuse holder.
10.
ON/Stand-by LED
25
EN
Publicité
Table des Matières
