Cisco Linksys WPSM54G Guide D'installation Rapide page 18

English : Driver Installation
To install the PrintServer on the other computers in your network, proceed
to step A. You must follow steps A-C for each computer.
CAUTION:
your printer's driver on each computer before you install the
PrintServer. (To install the printer, use the CD that came with your
printer.) For successful installation of the printer, make sure you
connect the printer's USB cable directly to your computer's
USB port.
A.
Insert the Setup CD-ROM into
the computer's CD-ROM drive.
The Setup Wizard should run
automatically.
B.
Click Click Here to Start.
C.
Click Set up Computer.
Congratulations! The installation of the Wireless-G PrintServer
Proceed to the next section, "3: How to Use the PrintServer".
16
Make sure you have set up your printer and installed
is complete.
Insert the Setup CD-ROM
Welcome Screen
Set Up Computer
WPSM54G
Wireless-G PrintServer