Installation On The Wall; Installation Example - ESBE MANIFOLD 1.2 Mode D'emploi

MULTIPLE INSTALLATIONS OF CIRCULATION UNITS
If more than one Circulation Unit should be used we recommend the use of Serie
ESBE GMA manifold, with or without hydraulic separator.

INSTALLATION ON THE WALL

Install the appliance on a solid wall which is not subject to vibration. It´s important
to position the hydraulic manifold considering its size and all the units connected.
When drilling holes in the wall for installation purposes, take care not to damage
any electrical wiring or existing piping.
1. Drill holes and insert suitable plugs.
Mount the manifold with the submitted wall-brackets. Fix the brackets to the wall
and position the manifold.
2. Choose the correct position for the piping for the circulation unit by usage of
the mounting template supplied with the circulation units package.
3. Connect the circulation units to the manifold.
GMA421, GMA431, GMA521, GMA531, GMA411
GMA321, GMA331
GMA421, GMA431, GMA521, GMA531, GMA411, GMA321, GMA331
GMA421, GMA431, GMA521, GMA531, GMA411, GMA321, GMA331

INSTALLATION EXAMPLE

OPTIONS FOR GMA421 AND GMA531
521 521 1 521 521 521 521 521 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
All piping schematics are general representations.
3 (28)
Max 70Nm
www.esbe.eu