Kohler K-T314 Notice D'installation page 2

ROUGHING-IN
Turn off the water supply.
Install or relocate the supplies as necessary to conform to
the roughing-in dimensions.
* Dashed lines indicate items to be supplied by the
installer.
Diameter of the spout hole in the deck = 1" (2.5cm).
1/4" (6mm) TO 2-1/8"
(5.4cm) MAX. RIM OR
DECK MOUNT
1-5/16"
(3.3cm) D.
RIM OR DECK MOUNT
INSTALLATION
A
1012557-2-
2-3/8" (6cm)
1/4" (6mm) TO 1-1/4"
(3.2cm) MAX.
FINISHED DECK
3/4" I.D.
8" (20.3cm) Min.
3-3/8"
3-3/8" (8.6cm)
(8.6cm)
4-1/2"
(11.4cm)
2-1/2" (6.4cm)
2-1/2" (6.4cm)
CROSS LEVER
Fig. #1
Diameter of valve hole in the deck = 1-1/2" (3.8cm).
NOTE: Reinforcing material may be required if the deck or
rim is thin. Install before proceeding.
NOTE: For installations on a rough (unfinished) deck to be
covered later with tile, the tile thickness must not exceed
1-1/4" (3.2cm).
9-1/2"
(24.1cm)
6-1/4"
(15.9cm)
2-1/8" (5.4cm) MAX.
ROUGH DECK
ROUGH + FINISHED
DECK MOUNT INSTALLATION
1-1/4"
3-3/4" (9.5cm)
(3.2cm)
4-1/2"
(11.4cm)
2-1/2" (6.4cm)
TEE
2
7-1/2"
(19.1cm)
7/8"
(2.2cm) D.
4-1/2"
(11.4cm)
Kohler Co., Kohler, WI U.S.A.