Toyotomi FF-55T Manuel D'utilisation page 8

Masquer les pouces Voir aussi pour FF-55T:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CHILD LOCK OPERATION
The childproof lock can be used to prevent
children accidentally changing the heater
settings. When the heater is burning and the
childproof lock is on, the heater can only be
switched off. Other functions are blocked then.
If the heater has already been switched off,
the childproof lock also prevents accidental ignition of the heater.
1. Press the CHILD LOCK (CLEAR) button for more than 3 seconds to set the childproof lock while in operation
or not operation. "CHILD LOCK" sign will be shown on the digital indicator.
To release the child lock operation, press the CHILD LOCK (CLEAR) button for more than 3 seconds.
WEEKLY TIMER OPERATION
1. Set the Weekly Timer
After setting the current time and a day of the week, press the "TIMER" button to enter the weekly timer setting
mode. The "TIMER" is shown on the display. When the "TIMER" button is pressed during setting of the weekly
timer, the "TIMER" sign is disappeared and the current clock time is shown on the display.
NOTE: You cannot enter the weekly timer setting mode, while in operation at AUTO operation mode.
1) Select the program number
1. Press the "sMIN." button or the "tHOUR" button to select the
program number.
The number of the program is 30. The unsetting program number is
flashing on the display. In the case of the first setting of the weekly
timer, "P01" is shown on the display and will flash. All of a day of the
week will also flash.
NOTE: When pressing the "sMIN." button at the position of "P30", you can hear the beep sound and "P30"
is not changed any more.
When pressing the "tHOUR" button at the position of "P01", you can hear the beep sound and
"P01" is not changed any more.
After the program is set, the next setting program number is shown on the display. If the program
is set until "P30", "P30" is shown on the display. Even though the program is set until "P30", if there
is the unsetting program number, the smallest unsetting program number is shown on the display.
Example:
When "P01" and "P02" programs are already set and "P03" is not set yet, the display is indicated as
follows.
"P01" – lighting ⇔ "P02" – lighting ⇔ "P03" – flashing
When "P01" and "P04" programs are already set and "P02" and "P03" are not set yet, the display is
indicated as follows.
"P01" – lighting ⇔ "P02" – flashing ⇔ "P03" – flashing ⇔ "P04" – lighting
2. Press the "SET" button to move to the next step (2) Set the timer).
The program number is eliminated by holding the "CLEAR" button continuously for 3 seconds.
2) Set the timer
1. Press the "sMIN." button or the "tHOUR" button to set timer.
2. Press the "SET" button to complete the set of timer and to move to
the next step (3) Set ON/OFF of weeklytimer).
NOTE: When "SET" button is pressed when showing the bars sign on
the display, you can hear the beep sound and cannot move to
the next step.
3) Set ON/OFF of weekly timer
1.
and all of a day of the week will flash on the display.
ON
Press the "sMIN" button or the "tHOUR" button to select
,
2. Press "SET" to complete the set ON/OFF of weekly timer.
When you set ON, the next step is 4) Set the temperature set of the program.
7
When you set OFF, the next step is 5) Set a day of the week of the program.
or
.
ON
OFF
ENGLISH

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ff-55

Table des Matières