Settings; The Initial Settings Procedure; The Home Screen At A Glance - Samsung HT-J5150 Manuel D'utilisation

Settings

The Initial Settings Procedure

~ The Home menu will not appear if you do not
configure the initial settings.
~ The OSD (On Screen Display) may change in
this product after you upgrade the software
version.
~ The access steps may differ depending on the
menu you selected.
1. Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Setup Language
screen.
2. Press the ▲▼ buttons to select the desired
language, and then press the E button.
3. The TV Aspect Ratio screen appears. Press
the ▲▼ buttons to select a TV aspect ratio, and
then press the E button.
You have four choices:
16:9 Original - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format
and 4:3 pictures (the old, standard format) in 4:3
pillar box format with black bars on the left and
right.
16:9 Full - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format
and expands 4:3 pictures to fill the 16:9 screen.
4:3 Letter Box - For older, standard screen,
analogue TVs. Displays 4:3 pictures in full screen
and 16:9 pictures in letter box format that retains
the 16:9 aspect ratio but puts black bars above
and below the picture.
4:3 Pan-Scan - For older, standard screen,
analogue TVs. Displays 4:3 pictures in full screen
and 16:9 pictures in Pan-Scan format that fills
the screen, but cuts off the left and right sides of
the picture and enlarges the middle vertically.
4. The "Initial settings completed." screen
appears, and then the Home screen appears.
✎
If you want to display the Setup screen again
and make changes, select the Reset option. (See
page 16)
✎
If you use an HDMI cable to connect the product
to an Anynet+ (HDMI-CEC)-compliant Samsung
TV and 1.) You have set the Anynet+ (HDMI-CEC)
feature to On in both the TV and the product and
2.) You have set the TV to a language supported
by the product, the product will select that
language as the preferred language automatically.

The Home Screen at a Glance

1
PLAY DISC PHOTOS
No Disc
Change Function Settings
Device
3 4 5
1 PLAY DISC
The disc currently in the tray is displayed.
Press E to start playing the disc.
2 PHOTOS/VIDEOS/MUSIC
Play photos, videos, or music content from a
Disc or a USB device.
3 Change Device
Displays a list of external devices connected to the
main unit. Switch to the desired device.
4 Function
Use for switching to an external device or to
the radio. You can use the remote control's
FUNCTION button and the main unit's
for mode switching.
12
- English
2
VIDEOS MUSIC
button