Safety Regulations; Layout; Items Supplied; Proper Use - EINHELL RT-PG 5000 DD Mode D'emploi D'origine

Anleitung_RT_PG_5000_DD_SPK7:_
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1/2)
1. Tank indicator
2. Tank cover
3. Push bar
4. Air filter cover
5. Servicing cover
6. Castors
7. Decompression cable
8. Warning light for oil pressure
9. Voltmeter
10. Safety trip 400V 3~
11. Selector switch for 230V~/400V 3~
12. Safety trip 230V~
13. 1x 12V DC safety trip
14. Earthing connection
15. 1x 12V DC connector
16. 2x 230V sockets
17. 1x 400V 3~ socket
18. Ignition lock
09.10.2009 11:04 Uhr Seite 13
3. Items supplied (Fig. 1-3)
Generator
12V adapter cable (Fig. 3/Item 19)
Battery mounting kit (Fig. 3/Item 20)
Ring spanner (Fig. 3/Item 21)

4. Proper use

The device is designed for all applications that
require a 230V/400V alternating voltage or 12V direct
voltage supply. Be sure to observe the restrictions in
the additional safety instructions. The generator is
intended to provide electric tools and light sources
with electricity. When using the device with
household appliances, please check their suitability
in accordance with the relevant manufacturerʼs
instructions. In case of doubt, ask an authorized
dealer.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
GB
13