Fuse Replacement; Infrared Remote Control - Chauvet DJ INTIMIDATOR WASH ZOOM 450 IRC Guide De Référence Rapide

Intimidator Wash Zoom 450 IRC QRG
What is
Included
To Begin
AC Power
Fuse
Replacement
Infrared Remote
Control 6
(IRC-6)
• Intimidator Wash Zoom 450 IRC
• Hanging Bracket with Mounting
Hardware
Unpack your Intimidator Wash Zoom 450 IRC and make sure you have
received all parts in good condition. If the box or contents appear damaged,
notify the carrier immediately, not Chauvet.
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product via breaker or by
unplugging it.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
The Intimidator Wash Zoom 450 IRC is compatible with the Infrared Remote
Control 6 (IRC-6) from Chauvet.
The following IRC-6 buttons are used with the Intimidator Wash 450 IRC:
• <BLACKOUT> - turns LED on/off
• <AUTO> - selects auto program mode (scrolling)
• <SOUND> - selects Sound-Active mode
• <STROBE> - strobing (0–20 Hz)
• <SPEED> - Pan/Tilt Auto program speed
• <SENSITIVITY> - selects sound sensitivity
• <%> - LED dimmer
• <MANUAL> - white (RGB) LED manual control
• <FADE/SNAP> - Press once for Fade color change/Press twice for Snap
• <R> - red LED manual control
• <G> - green LED manual control
• <B> - blue LED manual control
• <W> - white LED manual control
• <UV> - Zoom manual adjustment
• <+> - Increase
• <-> - Decrease
• <0> to <9> - Select Auto Program by Number
• Power Cord
• Quick Reference Guide
3
EN